Recommended usage scenario of Terncy switch module. Usage scenario 1: use with presence sensor Any sensor with dry contact can be used with the switch module How to connect 1.Connect L and N line, connect L line to L, N line to N; * Note: Power off during installation to prevent electric shock 2.Remove the cover of the interface, insert the 6-pin header into the interface firmly; * 12V is positive pole and GND is negative pole

v51 Date: 2019-10-27 Updates: Terncy Wall Switch now supports “Permanent Power”, which allows continuous power to your smart lighting devices Terncy Wall Switch now supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness Fix bug of wall switch may disconnect v43 Date: 2019-07-16 Updates: Support interlock rules between outputs (avoid multiple outpus being set to on at the same time) After an input is set to programmable, the corresponding output can still controlled independently Applicable on Home Center v2.

v80 Date: 2019-01-21 Updates： Support relay for door sensor with lower power consumption

The Terncy smart home platform can be integrated with other home automation platforms like Amazon Alexa, Google Home, Ali Genie, Rokid, Xiaodu Speaker. User have to use their Terncy account (email and password) to authorize other platforms to access their Terncy devices. As an example, the authorization page for Google is: Some users may not know or remeber their account information, especially if they created their Terncy account via mobile, wechat, QQ etc.

v2.1.1 Date: 2019-07-03 Updates: Support Terncy automation rules Need Home Center v2.6.10 or later to work Support management of HomeKit devices in iOS Support change device OTA channel between stable, test and development Support connecting to Home Center in LAN mode Currently support only one condition in automation rules Support change ZigBee RF channel Support wall switch, switch module’s inputs as programmable switch Support interlock between wall switch, switch module’s outputs v2.

You can receive system alarm in wechat if you subscribed to xiaoyan technology service account. Please scan the code below with your wechat, or extract qr code by long pressing the image.